Bell Tent FAQ

Thanks for your order! Whilst these are a leisure stove rather than a domestic stove, we always guide customers to follow building regulation specifications wherever possible. Obviously our stoves are fitted into many different types of fittings such as tents etc, but for your fitting of the log cabin using a heat shield behind we recommend the following guidelines Stove The Shield should be a min 1.5mm thickness galvanised steel and affixed with non combustible fittings ​ Shield should be open top and bottom to allow flow of air There shall be no protrusions above the shield to prevent air flowing behind the shield If these caveats are met then clearance to combustibles can be reduced to 95mm between stove and heat shield or 65mm Single skin flue pipes When the stove is connected to the chimney via a single skin steel pipe, this must be at least three its diameter (4 inch) from combustible materials. 3 x 4 inch = 12 inch from combustible materials.

Weathering
All our tents are produced from 100% cotton canvas and are 100% waterproof, but because canvas is a natural material it may need to go through a process cal...
Tue, 25 May, 2021 at 2:40 PM
Wooden Pack
The wooden pack contains:  • Wooden Centre pole.  • Ash Wood Sliders  • Wooden Dolly (Raincap) These are sent alongside the metal ones that come w...
Tue, 25 May, 2021 at 2:42 PM
Inner Tent
The inner tent is attached using clips that are already fitted into our tents and hung from the centre pole. It divides the tent into two spaces and creates...
Tue, 25 May, 2021 at 3:08 PM
Fire Retardant
All canvas tents are naturally ‘fire retardant’ rather than fireproof.  So our regular 285gsm canvas tents are fire retardant - which is why so many peo...
Tue, 25 May, 2021 at 3:25 PM
Mould & Mildew Cleaning
Here are our cleaning tips guide: For cleaning your canvas bell tent, there are there several methods & products that can help. Firstly, avoid bleac...
Tue, 25 May, 2021 at 3:46 PM