When picking a flashing kit we always get asked 'Which kit fits my tent?' when really the question is 'Which kit suits my stove?' 

We sell 3 styles of flashing kit - small, 45 degree and large. These kits are suitable for certain stoves

Small - This kit suits our 60ml flue pipe stoves (Portable Wood Burner & Firebox Stoves). If you have one of our tents with a pre fitted stove flap then this kit fits that hole, you just need to make the bolt holes. 

https://belltentboutique.co.uk/collections/flashing-kit/products/frontier-stove-tent-flashing-kit

45 Degree Kit - This kit can be used with all our stove styles but with a larger flue (Hygge Stove) you might need to trim the silicone a little to make the flue fit. This kit is an oval shape so is larger than our pre cut holes. To fit this safely we advise cutting the canvas back to make sure no canvas is left inside the flashing kit. 

Large Flashing Kit - This kit has been designed for our Hygge Stove which has a 4 inch flue - or is suitable when using the Firebox Twin Wall Flue section. The kit has got a guide on it so can be cut to size dependant on the flue. Again, if using in one of our tents with a hole this is larger so will need cutting 

https://belltentboutique.co.uk/collections/flashing-kit/products/traveller-stove-flue-kit

We advise removing the flashing kit when packing away the tent. The Flashing Kit can get damaged or the silicon can start to melt if the stove is operating too hot as its heat resistant to a maximum of 300 degrees, so best practice is to use 1/2 logs at a time and invest in a stove thermometer to keep an eye on the temperatures.